BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.

STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.

SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.

Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.

TESTING
Each valve is individually tested for bubble-tight closure at 110％ of full rated pressure.